Project

Specification

K100T-Ci

Size

400×245（mm）

LCD screen

7 inch; Resolution: 800×480

Control mode

KND Serial Servo Bus (KSSB)

Axis control function

Max. controlled axes：4 axes

Max. simultaneous axes：3 axes

Axes type: linear axis , A/B/C/D type rotation axis

Axis interlock, Emergency stop , Software and hardware over-travel limit

Preparation function

Up to 44 G codes, including rapid positioning, linear interpolation, circular interpolation, thread cutting and interpolation, reference point return, work coordinate system, tool compensation, cycle command, dwell, etc.

Interpolation function

G00、G01、G02、G03、G32、G34、G07.2、G78.1

Feed function

Maximum rapid traverse speed：60000mm/min

Maximum feedrate speed：30000mm/min

Rapid override：F0、25％、50％、100％

Feedrate override：0～150％（16 gears）

High-speed & high-precision control : Acceleration & deceleration control before interpolation, 5 types of acceleration & deceleration curve, Speed smooth control

Reference point

Automatic reference point return (G28), Return from reference point (G29), 2nd and 3rd reference point return (G30)

Thread function

Pitch: 0.01~500mm（Metric）; 0.06~25400teeth/inch（Inch）

Single/multiple thread, Metric/inch thread, Straight/tapper/face thread, Constant pitch/variable pitch thread, Circular thread

Thread retracting length, angle and speed can be specified

Digit spindle thread

Coordinate system and dimension

Least input increment：0.001mm

Max stroke :±99999999×Least input increment

Work coordinate system G50, G54~G59

Diameter/radius programming, Absolute/incremental programming

Skip function

G31

Spindle function

KSSB controlled spindle : 1, Analog spindle: 1, Digital spindle: 1

Gear control(S01～S08), Analog control(S0~S99999), Digit spindle control

Analog spindle auto/manual shift gears, Digital spindle positioning, Support digit spindle “speed/position” shift

Spindle speed override: 50～120%(8 steps), Analog voltage: 0～10V (stepless)

One interface for feedback signals from spindle encoder and the resolution of spindle encoder can be set.

Chuck check when spindle is running, Tailstock check, Spindle constant surface speed control（G96/G97）, G93 tapping, Spindle speed clamp, etc.

Tool function

Tool offset number: 16 groups

Tool length compensation, Tool nose radius compensation, Tool wear compensation

Tool presetting: absolute tool presetting, incremental tool presetting, tool compensation value adjusting, etc.

Auxiliary function

Standard M codes: 42

Special M codes: M21~M24，M71~M74，M91~M94

Program storage and edition

Program storage space: 640K (internal). Extension: access to a U-disk (no capacity limit). Electronic disk: 3

Programming : Incremental programming , Absolute programming , Incremental/absolute compound programming , Decimal point programming

Program edition: input, alter, delete, insert, search, copy, move, merge, etc. Editing programs on U-disk

Editing and executing multiple blocks in MDI mode

Sub-program calling(63 layers nested at most)

Program check

Fast drawing of tool path, Dry running, Single-block running, Machine lock, Auxiliary lock, Optional block stop, Optional block skip.

Simplified programming

Single canned cycle（G90/G92~G94）, Multiple canned cycle（G70~G76）

Compensation function

Backlash compensation : Use independent compensation values when executing positioning and cutting feed , range: 0～8mm

Pitch-error compensation: Provide 128 compensation points for each axis, range: ±0.1mm

Human-machine interface(HMI)

Language : Chinese and English

Graphics: 2D graphics of tool path

Current position, Program page, Program content, Parameter setting and display, Graph setting and display, Diagnosis data, Alarm, Run time, Parts count, Date, Time, Feed rate, Spindle speed, Spindle feed-back speed, etc.

Index information: Operation list, G code list, Parameter list, Diagnosis parameter list, Macro instruction list, Alarm list, and other customized information, etc.

Alarm: P/S alarm, Driver alarm, Over-travel alarm, System error alarm, KSSB alarm(only for KSSB controlled systems ), External alarm, etc.

Operation management

Operation mode : AUTO, JOG, MDI, EDIT, HOME, PHOME, STEP(HANDLE)

Program execution : AUTO run, MDI run, DNC run (U-disk , Ethernet , RS232), Dry run, Single block run, Auto handle run

Program switch , Parameter switch , Time-limit power-on/off , Parameter/program password protection

PLC function

Standard built-in type PLC

DI/DO (total): 40/24

External interface

KSSB interface (only for bus controlled system), Spindle encoder interface , Feed axes pulse interface(only for non-bus controlled system), Analog spindle interface

Machine operation panel interface , Additional panel interface , Separate operation box interface

DI interface, DO interface, Turret interface

RS232/485 interface, USB interface

Matched driver

SD310 AC servo driver (optionally matched with absolute encoder)

ZD210 spindle driver